EN DE
EN DE
    Pflaum® mineral wool panels

    Pflaum® FE

    The lightweight.

      The Pflaum® FE mineral wool composite panel is a true all-rounder with maximum efficiency. It was specially developed for the requirements of modern facade construction and impresses with its particularly low weight - and that without any compromises in terms of thermal insulation or fire protection. The inside of the non-flammable rock wool core is rigidly connected with hot-dip galvanized and coil-coated steel sheets - this prevents the insulation from sinking. Thanks to special labyrinth milling, the formation of cold bridges is also effectively prevented.

      The Pflaum® FE combines high fire protection and insulation standards with a light, airy construction and is therefore ideal for timeless facade designs - even for buildings with a higher fire load.

      Outside profilation
      Cover width  600
      • microprofiled
      • V-profiled
      • 3 lines
      Cover width 915
      • microprofiled 
      • mediumprofiled
      • V-profiled
      • 5 lines
      • 9 lines 
      Cover width 1000
      • microprofiled 
      • mediumprofiled 
      • 10 lines 
      Cover width 1100
      • microprofiled
      • mediumprofiled 
      • V-profiled
      • 11 lines 
      Cover width 1200
      • microprofiled 
      • 7 lines
      Inside profilation
      Cover width 600
      • smooth / flat
      • 3 lines
      Cover width 915
      • smooth / flat
      • 5 lines
      • 9 lines
      Cover width 1000
      • smooth / flat
      • 10 lines
      Cover width 1100
      • smooth / flat
      • 11 lines
      Cover width 1200
      • smooth / flat
      • 7 lines

      *smooth / flat surface for the outer sheet possible after consulting our sales department.
      visible fix wall panel
      Standard configuration: 0,63mm / 0,50mm| cover width 1.000mm
      fire behavior acc. EN 13501-1, A2-s1,d0
      fire resistance acc. EN 13501-2

      External and internal cover shell
      Galvanised steel
      0.50/ 0.63 / 0.75mm
      according to EN 10147
      (275g/m2 zinc) or ZM 120 (zinc - magnesium)

      Insulation core
      mineral fibre strands bonded transversely to the steel surfaces, 
      water-repellent and non-inflammable. class A1. Density 100kg/m3.

      Surface protection                           
      To process the Pflaum fire protection panel, the element is delivered with a protective foil on one side. 
      Inside optionally available.

      Dimensions
      Cover widths 
                                           
      600, 915, 1.000, 1.100  and 1.200mm
      intermediate widths on request

      core thicknesses
      60-200mm

      Lengths
      Standard lengths of up to 15,500mm depending on element thickness.

      Note
      Due to the surface contours you have to add 3mm to the standard thickness from 60 to 220mm for panels of the types LD, VD, MD and WD. 
      (e.g. type FO-VD/0/100 = 103mm).

      Certificates
      National approvals, examination certificates and attestations are available on request.

      Fireresistance 
      Requirements concerning fire must be quoted in your inquiry.

      Tolerances
      Quality assurance according to EN 14509.

      Approval
      DIBt Z-10.49 – 526
      P-3848/5460-MPA BS
      P-3135/257/07-MPA BS
      EC 0769-CPD-113344-1
      EC 0769-CPD-113344-2
      EC 0769-CPD-113344-3