EN DE
EN DE
    Pflaum mineral-wool-panels

    Pflaum FEI

    The insulation pro.

      The mineral wool panel Pflaum FEI combines the best insulating performance with an invisible fixation. The special tongue and groove milling hides mounting clips behind the ceiling shells. Inside the panel, shear-resistant and non-combustible mineral fibers prevent the thermal insulation from sagging. This does not only provide an immaculate façade, but also a robust and durable one that is precisely tailored to your building.

      Outside profilation
      Cover width 600
      • microprofiled 
      • V-profiled 
      • 3 lines
      Cover width 915
      • microprofiled 
      • mediumprofiled 
      • V-profiled
      • 5 lines 
      • 9 lines
      Cover width 1.000
      • microprofiled 
      • mediumprofiled 
      • 10 lines
      Cover width 1.100
      • microprofiled 
      • mediumprofiled 
      • 10 lines
      Inside profilation
      Cover width 600
      • smooth / flat
      • 3 lines
      Cover width 915
      • smooth / flat
      • 5 lines
      Cover width 1.000
      • smooth / flat
      • 10 lines
      Cover width 1.100
      • smooth / flat
      • 10 lines

      *smooth / flat surface for the outer sheet possible after consulting our sales department.
      secret fix wall panel
      Standard configuration 0,63mm / 0,50mm |cover width 1.000mm
      fire behavior acc. EN 13501-1, A2-s1,d0
      fire resistance acc. EN 13501-2

      External and internal cover shell
      Galvanised steel 
      0.50 / 0,63 / 0.75mm 
      according to EN 10147
      (275g/m2 zinc) or ZM 120
      (zinc - magnesium)

      Insulation core
      mineral fibre strands bonded transversely to the steel surfaces, 
      water-repellent and non-inflammable. class A1. Density ? 100 kg/m3.

      Surface protection
      To process the Pflaum fire protection panel, the element is delivered with a protective foil on one side. 
      Inside optionally available.

      Dimensions
      Cover widths
      600, 915,1.000 and 1.100mm

      core thicknesses
      60-200mm

      Lengths
      Standard lengths of up to 15.500mm depending on element thickness.

      Note
      Due to the surface contours you have to add 3mm to the standard thickness from 60 to 220 mm for panels of the types LD, VD, MD and WD. 
      (e.g. type FO-VD/0/100 = 103mm).

      Certificates
      National approvals, examination certificates and attestations are available on request.

      Fireresistance 
      Requirements concerning fire must be quoted in your inquiry.

      Tolerances
      Quality assurance according to EN 14509.

      Approval
      DIBt Z-10.49 – 526
      P-3848/5460-MPA BS
      P-3135/257/07-MPA BS
      EC 0769-CPD-113344-1
      EC 0769-CPD-113344-2
      EC 0769-CPD-113344-3